If a game only used 1 button, then it will always be button 1 closest to the joystick.

We manually email cabinet tracking, while PC tracking is sent by our automated system.

The game discs are for backup purposes only and already loaded on the PC, you can simply store them inside the cabinet.

If your PC only has 3 USB ports on the back, there are 2 more on the front (behind a door on some models).

Maximus Arcade 2.10 Serial Full Length Of

The Purple and Green round connectors on your X-Arcade and inside the machine are not used The cables for the PC are bound with a wire tie and ready for hookup, you can carefully cutunscrew the wire tie to get the full length of the cables.

The greenwhite cable is not needed ( for connecting coin door only ), simply store it in the cabinet.

The X-Arcade Tankstick manual is a general manual for using the control panel itself, as it uses the same electronics.

WARNING: Do not turn off the Machine without first turning off the PC properly by simply tapping (do not hold) the power button on the front of the PC.

Maximus Arcade 2.10 Serial How To Get Things

The PC is shipped separate from the Machine, here is how to get things up and running: Initial Setup: Open the rear door and place the PC on the shelf with the front of the PC facing the coin door (for easy powering of PC).

The controls, audio, and VGA video cables are already waiting near the PC.

Connect the 2 USB plugs for the control panel to the USB ports on the back of the PC.

Connect the greenblack headphone cable into the green headphone jack on the back of the PC (typically the center port).

Put the keyboard and mouse inside, and then connect their USB connections into the back of the computer.

Plug one end of the power cable that came with the PC into the back of the PC, and the other end into the white power strip.

Connect the other power cable between the cabinet and your wall socket, a surge protector is recommended.

Connect the other power cable between the cabinet and your wall socket, then turn on the power switch on the back of the cabinet and on the power strip inside if needed.

A surge protector is recommended which will also give you an easier way to power onoff the cabinet without having to get behind it.

Turn on the PC, wait for it to fully boot to the arcade playing software.

Basic Operation IMPORTANT: If the light on the top-right of the control panel is not lit, it will not work.

Try switching the Serial Switch Box from A to B, and then back to A again.

To choose a game, first pick which system you want to play using the joystick or trackball, then press the Player 1 Start button.

Also use the joysticktrackball to scroll the list of games and press Start again to start one.

Maximus Arcade 2.10 Full Serial